Mighty Shipping
Knowledge Base · Project & OOG Ocean Freight

OOG Special Container Shipping from China: Open Top & Flat Rack Specs, Lost Slots Math & CTU Lashing Guide

When machinery, boilers, vehicles, or steel assemblies exceed standard container dimensions, they trigger carrier "Lost Slots" charges, special terminal lifts, and mandatory marine surveyor sign-off. Here is a clear, practical guide to Open Top and Flat Rack clearances, Lost Slots pricing math, IMO CTU Code lashing, and Qingdao Port stuffing workflows.

Updated 2026-11-09 ~8 min read Mighty Shipping OOG & Project Cargo Desk

Keep three rules in mind when shipping Out-of-Gauge (OOG) cargo on 20OT/40OT Open Tops and 20FR/40FR Flat Racks: (1) Always quote using final crated dimensions + Center of Gravity (CoG) + lifting/lashing drawings — 5 cm of extra crate framing can turn an inexpensive In-Gauge box into a costly OOG shipment; (2) Understand the OOG freight formula = Base Equipment Rate + Lost Slots + Terminal OOG Lift Fees — Over-Height alone adds +1 lost slot, dual-side Over-Width adds +2 lost slots, and combined Over-Width + Over-Height blocks +5 surrounding slots (you pay for 6 container slots); (3) Use Low-Bed Trucking + Port CFS Stuffing for 90%+ of OOG loads — a 0.60 m-thick 40FR floor atop a 1.45 m container chassis already sits 2.05 m high before loading, breaking China's 4.0 m highway height limit, and carriers require IMO CTU Code lashing plus a third-party Marine Surveyor certificate at the port before gate-in.

1. 20OT / 40OT / 20FR / 40FR Dimensions, Clearances & Linear Floor Loads

When cargo exceeds 40HQ door height (2.58 m), internal width (2.35 m), or forklift tail-loading limits (see our Container Sizes & Load Calculation Guide), it moves on Open Top (OT), Flat Rack (FR), or Platform (PL) equipment. Always check corner-post clearances and linear floor load limits (tonnes per meter, t/m):

Equipment Type Effective Internal Clearances Floor Height / Tare Max Payload Linear Floor Load Limit
20OT
20ft Open Top
5.89 m L × 2.34 m W × 2.31 m H
Top roof opening width: 2.21–2.23 m
~0.28 m floor
Tare ~2.3 t
~28.0 t 4.2–4.8 t/m
40OT / 40HCOT
40ft Open Top
12.02 m L × 2.34 m W × 2.31 m / 2.62 m H
Top roof opening width: 2.21–2.23 m
~0.29 m floor
Tare ~4.0 t
~26.5 t 3.0–3.5 t/m
20FR
20ft Flat Rack
5.90 m L (5.62 m between corner posts)
2.44 m deck W (2.22 m between posts)
In-gauge height limit: 2.23–2.27 m
~0.34 m floor
Tare ~2.9 t
31–34 t 7.5–9.0 t/m
40FR
40ft Heavy Flat Rack
12.02 m L (11.65 m between corner posts)
2.44 m deck W (2.22 m between posts)
In-gauge height limit: only 1.95–2.14 m
0.60 m thick floor
Tare ~5.4 t
39–45 t 6.5–8.5 t/m

Two critical engineering checks: (1) Why is a 40FR's in-gauge height only ~2.0 meters? Without side walls to carry load, a 40FR uses 60 cm-deep steel bottom girders — leaving only 1.95–2.14 m of clear height below the top corner castings. A 2.30 m-tall machine automatically becomes Over-Height on a 40FR. (2) Linear floor load math: Line Load = Gross Weight (t) ÷ Contact Length (m). A 26-tonne transformer with a 2.0 m base exerts 13 t/m and requires 4.5 m longitudinal steel H-beams or hardwood spreader beams to distribute the load safely.

2. How Carriers Price OOG Cargo: "Lost Slots" Math Explained

Container ships stow boxes inside fixed 2.44 m-wide cell guides. Whenever cargo protrudes beyond the container frame, it physically blocks adjacent cells, and the carrier charges for those Lost Slots (for standard surcharges, see our Ocean Freight Charges Breakdown). Assuming a $2,000 base 40ft slot rate and $800 special-equipment premium:

OOG Scenario (on a 40FR) Cross-Section Cell Geometry Total Slots Billed Illustrative Ocean Freight
1. In-Gauge (IG)
W ≤ 2.44 m, H ≤ 1.95 m
Fits inside 1 standard cell; zero adjacent slots blocked 1 Base + 0 Lost = 1 Slot ~$2,800
2. Over-Height Only (OH)
W ≤ 2.44 m, cargo above top castings
Blocks 1 slot directly above 1 Base + 1 Lost = 2 Slots ~$5,100–$5,500
3. Dual-Side Over-Width (OW)
W = 3.20 m, H ≤ 1.95 m
Top remains stackable, but left and right bays lose 1 slot each 1 Base + 2 Lost = 3 Slots ~$7,200–$7,800
4. Over-Width + Over-Height (OW + OH)
W = 3.40 m and H = 2.80 m
In a 3-wide × 2-high grid (6 cells): cargo sits center-bottom (1), blocks left/right bottom (+2), blocks center-top (+1), and left-top & right-top cannot float in mid-air so they are also lost (+2) 1 Base + 5 Lost = 6 Slots! ~$13,500–$15,000+

Key notes: (1) Carriers prohibit offsetting wide cargo to one side because eccentric center of gravity causes dangerous crane tilt; (2) When a piece triggers 5+ lost slots or exceeds 4.5 m width / 40 tonnes, compare Breakbulk / Ro-Ro vessel options; (3) Both origin and destination terminals levy OOG Stevedoring Surcharges for extension-frame or wire-sling lifts.

3. IMO CTU Code Lashing Standards & Third-Party Marine Survey

Ocean vessels experience up to 0.8g of transverse rolling force (80% of cargo weight pushing sideways). Major carriers at Qingdao Port enforce a strict "No Marine Surveyor Certificate, No Gate-In" rule inspected by SGS, BV, CCIC, or CCS under the IMO CTU Code:

  • Steel Wire Ropes & Crosby Clips: Heavy units (15t+) use Ø16–Ø28 mm wire ropes with forged turnbuckles and bow shackles secured to 5-tonne lashing rings. Each eye requires 3–4 Crosby clips with all saddles on the live load-bearing line ("Never Saddle a Dead Horse").
  • Polyester Webbing + Edge Protectors: Painted machinery uses 5–10t rated lashing straps fitted with heavy PVC/rubber sleeves over every sharp edge.
  • Anti-Slip Rubber Mats & ISPM 15 Timber Blocking: Place high-friction rubber mats under steel skids (never metal-on-metal) and chock all four sides with 10×10 cm or 15×15 cm timber. Every piece of wood must carry legible ISPM 15 (IPPC) stamps with zero bark (see our Export Inspection & CIQ Guide).
  • Deck Sea-Spray Protection: Use 3-layer protection (VCI anti-rust film + vacuum aluminum-foil bag + export crate or marine shrink-wrap) against salt spray.

4. Qingdao Port Stuffing Workflow & "Ship-Side Direct Delivery"

Why can't you send an empty 40FR to an inland factory? Because a 1.45 m container chassis + 0.62 m 40FR floor = 2.07 m empty deck height — loading a 2.90 m machine pushes total height to 4.97 m, violating China's 4.0 m highway limit.

Instead, cargo moves via low-bed drop-deck trailer (0.5–0.8 m deck height) into our Qingdao Port warehouse for one-stop hoisting and lashing (see our Qingdao Port Export Operations Guide):

  • ETD - 10 to 14 Days (Engineering & Booking): Submit final packed L × W × H, weight, CoG, and lifting drawings to lock carrier OOG approval and Lost Slots count.
  • ETD - 4 to 5 Days (Low-Bed Arrival & Port Stuffing): Deliver cargo to our Qingdao port warehouse under an Oversize Permit; hoist onto the OT/FR with overhead cranes, lay anti-slip mats/spreader beams, and complete CTU lashing.
  • ETD - 3 Days (Marine Survey): SGS/BV/CCIC surveyor verifies dimensions and lashing on site and issues the English Lashing Survey Certificate.
  • ETD - 1 to 2 Days (Terminal Gate-In or Ship-Side Delivery): Standard OOG units gate into QQCT's OOG yard with certified VGM. For super-heavy units (> 35–40 tonnes) or extreme widths that cannot enter the yard, we arrange Ship-Side Direct Delivery (Hook-On) — pre-clearing customs and driving the low-bed trailer directly under the berth quay crane during vessel loading.

5. Top 5 OOG Pitfalls & On-Deck B/L Insurance Rules

  1. 5 cm of Crate Overhang Tripling Freight: Booking In-Gauge off naked machine drawings, only to have crate framing add 6 cm per side and trigger 5 Lost Slots. Always control outer crate dimensions strictly.
  2. Unmarked Off-Center Gravity (CoG): Loading an asymmetric machine dead-center causes the container to tilt >5° when lifted by the terminal crane, resulting in immediate rejection.
  3. Unstamped Timber Blocking Triggering Re-Export: Using scrap pine wedges without IPPC stamps leads to quarantine rejection of the entire unit at US, EU, or Australian ports.
  4. Overlooking Destination Port Crane Limits: Always verify that destination feeder vessels and port cranes can handle your unit's gross weight (some outports cap at 25–30 tonnes).
  5. "On-Deck" Bills of Lading & Insurance Gaps (Critical): Most OOG Flat Racks and over-height Open Tops are stowed On Deck, with B/Ls stamped SHIPPED ON DECK AT SHIPPER'S RISK. Under Article 53 of the 2026 Chinese Maritime Code, carriers are exempt from inherent deck exposure risks (see our Ocean Cargo Claims Guide), while standard ICC(A) policies default to under-deck stowage. You must declare On-Deck Stowage to underwriters before sailing and add On-Deck, Washing Overboard, and Rust/Sea-Spray coverage (see Marine Insurance), and ensure any L/C permits On-Deck B/Ls.

6. OOG Booking & Pre-Shipment Checklist

6 data points required for an accurate OOG quote:

  • □ 1. Commodity & HS code (drain fuel tanks and disconnect batteries on machinery)
  • □ 2. Final packed L × W × H (in mm) and gross weight per piece (kg)
  • □ 3. Center of Gravity (CoG), lifting lugs, and lashing-point drawings/photos
  • □ 4. Packaging type (naked, steel skid, plywood case, or shrink-wrap) and removable attachments
  • □ 5. Stuffing check: rubber anti-slip mats, load-spreader beams, proper Crosby clip orientation, IPPC stamps on all wood, and signed Lashing Survey Certificate
  • □ 6. Document & insurance check: certified VGM, L/C acceptance of On-Deck B/L, and On-Deck + Rust insurance endorsements in place before departure

7. Mighty Shipping: OOG Booking, Port Lashing & Neutral Partner Handling

With 26 years at Qingdao Port (see our Qingdao Port Export Guide), Mighty Shipping delivers end-to-end OOG and project cargo execution for exporters, EPC buyers, and overseas WCA/NVOCC forwarders:

  • Direct OOG Space with 30+ Carriers & Breakbulk Comparison: Direct access to CMA CGM, Maersk, MSC, COSCO, ZIM, and Hapag-Lloyd OOG desks across Southeast Asia, Middle East, North America, Japan/Korea, Europe, Africa, and South America, plus Breakbulk/Ro-Ro comparisons (see Ocean Freight).
  • 15,500㎡ Qingdao Port Warehouse + CTU Lashing + Surveyor Sign-Off: In-house rigging teams, heavy cranes, VCI/shrink-wrap protection, on-site SGS/BV/CCIC certification, low-bed trucking, and Ship-Side Direct Delivery (see Warehousing & Trucking).
  • Neutral Ground Handling for Peer Forwarders: Already booked your own carrier space? Appoint Mighty Shipping for neutral Qingdao ground handling — empty equipment pickup, low-bed drayage, port stuffing, CTU lashing, surveyor sign-off, customs, and gate-in under strict non-solicitation protection.

Have Over-Width / Over-Height Machinery or Need Qingdao OOG Ground Handling?

Send us your packed dimensions, gross weight, drawings/photos, and destination port. Our OOG engineering desk will reply within 12 hours with an optimal stowage plan, Lost Slots breakdown, and port-stuffing quote.

Get an OOG Solution & Quote

Frequently Asked Questions (FAQ)

What is the difference between In-Gauge (IG) and Out-of-Gauge (OOG) special containers, and why does OOG cost 2x to 6x more?

In-Gauge (IG) means cargo in an Open Top or Flat Rack stays completely inside the container's outer dimensions, paying only 1 equipment rate. Once cargo protrudes in height, width, or length (OOG), the carrier charges for blocked surrounding "Lost Slots" and terminals add special lifting surcharges — typically 2x to 6x a standard rate.

How do ocean carriers calculate "Lost Slots" on OOG Flat Rack and Open Top shipments?

(1) Over-Height Only (OH) blocks 1 slot above = 2 slots billed; (2) Dual-Side Over-Width Only (OW) blocks 1 slot on each side = 3 slots billed; (3) Combined Over-Width + Over-Height (OW + OH) blocks left/right bottom (+2), center-top (+1), and left/right top (+2, which cannot float above empty cells) = 6 slots billed in total.

A 40FR Flat Rack is 12.19 m long externally — why won't my 11.85 m machine sit flat on the floor?

Because structural corner posts protrude inward at all four corners: clear width between corner posts is only 2.22–2.24 m, and full-width clear length between inner corner posts is only 11.65–11.78 m.

Why are 90%+ of OOG exports from China stuffed and lashed at a Port CFS Warehouse rather than at the factory?

A 1.45 m container chassis plus a 0.60 m 40FR floor already sits 2.05 m high before loading, violating China's 4.0 m highway height limit. Hauling cargo on a low-bed trailer (0.5–0.8 m high) to a port warehouse allows legal road transit, heavy crane hoisting, IMO CTU lashing, and mandatory on-site Marine Surveyor certification.

What is "Linear Floor Load (t/m)" and how do you load compact heavy cargo?

Container payload assumes even weight distribution. A 28t unit with a 2 m base exerts 14 t/m (exceeding a 40FR's ~7.5 t/m limit) and requires longitudinal steel H-beams or hardwood spreader beams to spread the load across the floor.

Does standard marine cargo insurance cover OOG Bills of Lading stamped "ON DECK AT SHIPPER'S RISK"?

No — standard ICC(A) policies default to under-deck stowage. You must declare On-Deck Stowage to the insurer before sailing and add On-Deck, Washing Overboard, and Rust/Sea-Spray endorsements.

References & Further Reading

Sources reviewed on 2026-11-09. Carrier Lost Slots formulas and terminal OOG tariffs vary by vessel and lane; always confirm against the carrier OOG desk's written approval.

Get a Free Quote